Main Range of product Phaseo Product or component type Power supply Power supply type Regulated switch mode Input voltage 100...120 V AC single phase, terminal(s): N-L1 200...500 V AC phase to phase, terminal(s): L1-L2 Output voltage 24 V DC Rated power in W 240 W Provided equipment Power factor correction filter conforming to IEC 61000-3-2 Power supply output current 10 A Output protection type Against overload, protection technology: manual or automatic reset Against overvoltage, protection technology: 30...32 V, manual reset Against short-circuits, protection technology: manual or automatic reset Against undervoltage, protection technology: tripping if U < 21.6 V Thermal, protection technology: automatic reset Ambient air temperature for operation 50…60 °C (with derating factor) -25…50 °C (without)

Complementary Input voltage limits 170...550 V 85...132 V Network frequency 47...63 Hz Inrush current 30 A 2 ms Cos phi 0.68 at 240 V 0.69 at 120 V Efficiency 87 % Output voltage limits 24...28.8 V adjustable Power dissipation in W 31 W Line and load regulation 1...3 % Holding time >= 120 ms at 400 V >= 20 ms at 100 V >= 40 ms at 240 V Permissible temporary current boost 1.5 x In (for 4 s) Connections - terminals For diagnostic relay: removable screw terminal block, connection capacity: 2 x 2.5 mm² For input connection: screw type terminals, connection capacity: 3 x 0.5...3 x 4 mm² AWG 22...AWG 12 For input ground connection: screw type terminals, connection capacity: 1 x 0.5...1 x 4 mm² AWG 22...AWG 12 For output connection: screw type terminals, connection capacity: 4 x 0.5...4 x 4 mm² AWG 22...AWG 12 For output ground connection: screw type terminals, connection capacity: 1 x 0.5...1 x 4 mm² AWG 22...AWG 12 Marking CE Mounting support 35 x 7.5 mm symmetrical DIN rail 35 x 15 mm symmetrical DIN rail Operating position Vertical