很多用户工 厂叉车不至一台，购买同款的叉车电池，但使用时间相差甚远，我们可以检查叉车电池的实际电流比对，这样可以找出问题所 在。http://www.berens-china.com

台励福电瓶叉车蓄电池属于铅酸电池中的一种，其工作原理是将化学能转化为电能。它的作用是把有限的电能储存起来，在合适的地方使用。在此好运旺叉车租赁要提醒大家 注意的是：电池不能横放！因为电池内部一般是22～28%的稀硫酸，电池正放的时候电解液可以淹没极板并还剩一点空间，如果将电池横放会有一部分电极板暴 露在空气中，对电池的极板非常不利。电瓶叉车多使用直流串激电动机，其机械特性能满足叉车所需要的低速大扭矩的工作要求。除此之外，电瓶叉车的其他优点 是：操纵简单，检修容易，运转时平稳无噪声，不排废气，不污染空气，运营费用较低，整车的使用年限较长。缺点是：需要充电室和充电设备，充电时间较长，对 路面要求高，由于蓄电池容量的限制，电动机功率小，爬坡能力低，运行速度较内燃叉车慢，基本投资高，起重量较小，电瓶叉车和内燃叉车的区别，除了动力装置 外，行走传动机构及其操纵装置也有所不同，但是叉车的工作装置及液压系统、转向装置、制动装置、驱动桥和转向桥等则是彼此相同或相似的，综上所述，控制好 叉车的电机实际功率，对叉车电池的寿命可得以延续。

台励福电动叉车蓄电池的核对性试验可以反 应电池组的实际容量，我们一般建议出厂前都作为容量实际性的测试，这样可以反应用户在后期使用时间的理论值，无论通过哪种设备进行容量检测，都必须是以 C5的时间作为基准，因为叉车蓄电池是以持续工作及放电的一个过程，达不到要求，将会降低它的储能电力，可以以恒定电流对蓄电池组进行充电，达到额定容量 后，以恒定电流进行对电池组放电，直至单体电池电压或电池组总电压达到终止电压。按以下公式进行容量计算：C==I*t（C是电池组容量，Ah；I是恒定 放电电流A；t是放电时间h）；核对性放电：长期处于浮充电状态的电池组，要是依靠测量单体电池的端电压来判断电池是否失效是很难的，有效办法是通 过核对性放电试验来检验电池容量，判断电池的好坏。检验方法是将电池组脱离UPS系统，以恒流或恒功率进行放电。当电池组出现单体电池放到规定的终止电 压，立刻终止放电，避免过放电；带载放电：除容量试验和核对性放电外，在不影响负载正常供电的情况，让UPS系统工作在电池模式，带载放电一定时 间，进行实际的带载能力测试，可测试出电池组的实际带载能力，这种方法***好判别出一组电池里，是否个别电池性能下降，及时进行更换，但这种测试存在一定的 风险，要在安全的情况下进行，叉车蓄电池的负载初期实验不适宜太大的电流通过，可先计算理论的输出值，在实行检测。Tailift forklift battery supporting 2.5 tons of 48V600Ah, the original tailift battery type table for the 24-6DB600, 6PZB600, FB25 for tailift forklift, tailift forklift 2.5 tons battery weighs about 1 tons, 4-5 years of life, different places, the service life is different, you can choose different battery tailift forklift battery brand configuration the factory, for different groups of customers, have launched standard battery, GS battery, HOPPECKE torch, FAAM Hawke Hawker, hebeike battery electric forklift battery specifications; at present in accordance with the deep circulation discharge can be divided into 1500 and 1000 class life, using tubular plate production, battery shell with high strength, not easy to break. The unique design of the ventilation cover, can effectively prevent the battery electrolyte spills, the battery cover part is additionally provided with a special device,. Hydrogen exhaust plug, ensure the hydrogen evolution in using process to meet safety standards, will not produce sparks, avoid to cause explosion, no leakage by heat sealing technology and unique breathable cover design, can effectively prevent the battery electrolyte leakage, no emissions and no pollution in the process of using, to ensure that the work environment clean. Tailift forklift battery according to connections can be divided into hard connection and connection, with GS, forklift battery basic to the welding torch, other foreign brand forklift battery mostly soft connection, by virtue of the power battery core technology innovation breakthrough, after years of development and accumulated experience, and after many customers at home and abroad with the verification process outstanding price, exquisite manufacturing, energy efficient products, shell lens traction lead-acid battery in forklifts industry just a few years time, has many domestic and foreign merchants formed a forklift strategic cooperative partnership,

to provide quality tailift forklift battery for the majority of users. Forklift battery is constant according to the current vehicle motor power output time, with a forklift, power output is different, so the working time, the power consumption of a large gap, such as: a group of 2.5 tons of forklifts, forklift battery traction configuration is 9PZS630,48V630AH, the total power battery calculation method for voltage 48, capacity is 630, so the total power is 30240W, if the forklift motor is 5KW, power to discharge 5KW can work 6 hours or so, according to the capacity of 630AH, GB is 5HR output current discharge of 630 /5=126A, the working time is 5 hours.
Many users, factories, forklifts, not less than one, buy the same forklift battery, but the use of time is very different, we can check the actual forklift forklift battery current, so that we can find the problem.
Tailift forklift battery belongs to a lead-acid battery, its working principle is to convert chemical energy into electrical energy. Its function is to store the limited electrical energy and use it in the right place. This good luck Wang forklift rental to remind you that the battery can not be placed horizontally! Because the internal battery is generally 22 ~ 28% dilute sulfuric acid electrolyte can be submerged plates and had a little space when the battery is placed horizontally, if the battery will be a part of the electrode plate is exposed in the air, the battery plate is very unfavorable. The battery forklift truck uses DC series motor more frequently, and its mechanical characteristics can meet the requirements of low speed and big torque required by forklift truck. In addition, the other advantages of the battery forklift are: simple operation, easy maintenance, smooth operation, no noise, no exhaust gas, no pollution of the air, low operating costs, long service life of the vehicle. Disadvantage: the need to charge chamber and the charging device, the charging time is long, high requirements on the road, because the battery capacity limit, motor power is small, the climbing ability is low, run faster than the internal combustion forklift is slow, the basic investment is high, the weight is small, the difference between forklift and forklift trucks, except the power device, a walking transmission mechanism and the control device are different, but the forklift working device and hydraulic system, steering system, braking device, drive axle and steering axle are identical or similar to each other, to sum up, the actual motor power control of forklift, forklift battery life can be extended.
Check test tailift electric forklift battery battery capacity can be the actual reaction, we generally recommend the factory as a practical capacity test, this can reflect the user time in the latter part of the theoretical value of testing the capacity of either equipment, must be in the time of C5 as the benchmark for forklift battery is in a process of continuous work and discharge, not up to the requirements, it will reduce the power to battery, can charging with constant current, rated capacity, to discharge the battery with a constant current, until the single battery voltage or total battery voltage to the terminal voltage. Calculated by the following formula for capacity: C==I*t (C is the battery capacity, Ah; I is a constant discharge current of A; t is the discharge time h); check and discharge: a battery charging state of the long term, if rely on end single battery voltage measurement to determine whether the battery failure is difficult, effective approach is to test the battery capacity by checking discharge test, determine the quality of the battery. The test method is to remove the battery from the UPS system and discharge at constant current or constant power. When the battery group single battery voltage on the provisions of the termination, immediately stop the discharge, avoid excessive discharge; load discharge capacity: in addition to test and check and discharge, without affecting the normal power supply load situation, let the system work in the battery UPS