防爆安全出口标志灯产品特点: 铝合金压铸壳体，表面高压静电喷塑 2、钢化玻璃透明量，高防腐性能的不锈钢外露紧固件 3、配置长寿命高亮度的LED光源，功耗低，高亮度，寿命长达10w小时，有效满足节能，环保的要求 4、特殊设计的内部电路，具有过充电保护、短路保护、过放电保护等多种功能，有效保证使用性能 5、高防护的结构设计，配装耐老化的硅橡胶密封垫，达到IP66防护要求 6、本灯具为常明灯形式，即正常照明、应急照明灯具均显示，在正常电源断电时，自动切换到应急状态，应急电池放 电，应急时间不小于120分钟 7、电磁兼容达标，符合国际EMC标准 8、钢管或电缆布线均可 Explosion-proof safety exit sign light applicable environment: 1. Widely used in dangerous places such as oil exploration, oil, and chemical industries, for safety exit indication and evacuation signs. 2. Suitable for places with high protection requirements, humid environments, etc. 3. Suitable for gas environments in zones 1 and 2. 4. Suitable for combustible dust environments in zones 20, 21, and 225. Suitable for IA/IB class explosive gas environments. 6. Suitable for temperature groups T1-T6. Product features of explosion-proof safety exit sign light1. Aluminum alloy casting shell, high-pressure electrostatic spraying on the surface. 2. Tempered glass transparency, high corrosion resistance stainless steel exposed fasteners. . Equipped with long-life high-brightness LED light source, low power consumption, high brightness, long life up to 100,000, effectively meeting the requirements of energy saving and environmental protection. 4. Special internal circuit design, with overcharge protection, short circuit protection, over-discharge protection and other functions, effectively ensuring usage performance. 5. High-protection structural design, equipped with aging-resistant silicone rubber sealing pad, reaching IP66 protection requirements6. This light is a constant-on light, meaning both the normal lighting and emergency lighting are displayed. In case of normal power failure, it automatically switches to state, with the emergency battery discharging, and the emergency time is no less than 120 minutes. 7. Electromagnetic compatibility meets standards, with international EMC standards. 8. Can be wired with steel pipe or cable. 1. Do not disassemble in flammable and explosive places while powered on. . Do not damage the explosion-proof surface during installation, and keep it clean. The explosion-proof surface bolts should be tightened evenly, and no foreign objects should be in the explosion-proof surface. 3. Regularly check the performance of the alarm. If it fails or is damaged, it should be repaired by a professional
拨号
首页
飞语
我的
反馈
