北京布莱迪仪器仪表有限公司
电阻远传压力表YTZ
Pressure gauge with resistance transmitter
　　仪表由一个弹簧管压力表和一个滑线电阻式传感器组成，当被测压力变化时，弹簧管端
产生位移，一方面通过传动系统使指针在度盘上指示相应压力，另一方面带动电刷在电阻上
滑行，使被测压力值的变化转换为电阻值的变化，并传至二次仪表上指示相应的压力。
The gauge is formed by a bourdon tube pressure gauge and a adjustable resistance
transmitter. When the pressure is changing, the tube end deformed, and the pointer is to
show the pressure value through the driving system, at the same time, the brush is slipping
on the resistance to transmit the pressure values to resistant values, which is transmited to
the secondary gauge to show the relative pressure value.
简 介
　　电阻远传压力表通过仪表内部的滑动
电阻发送器把被测值以电量值传至远离测
量点的二次仪表上，以实现集中检测和远
距离控制，此外本仪表能够同时就地指示
压力，（便于现场工艺检查）。本仪表还可
以与膜片隔离器（隔离体）连接，制成电
阻远传隔膜压力表，可测量腐蚀性较强、
黏度大、易结晶介质的压力。
PD ·05 - 1
BRIEF INTRODUCTION
　　Through the built-in adjustable resistance transmitter, 840 series gauges can transmit the measured
values to the secondary gauges far from the site and achieve the concentrated examination and remote
control. Meanwhile, the gauges can indicate the pressure value (for spot technical inspection). It can be
connected with deaphragm insulator, making pressure gauge with resistance transmitter, Designed for
strong corrosive, viscous and easy to be crystallographic media.
工作原理
Operating
principle
PD(37) 35 2008.11.6, 3:59 PM
BEIJING BRIGHTY INSTRUMENT CO.,LTD.
MODEL YTZ
YTZ 主要技术参数YTZ Specifications
测量介质：对铜合金无腐蚀作用气体或液体Medium: Gas or liquid, whice doesn’t corrode
（可与多类化学密封隔离器配 copper alloy (could be used in corrosion
接在各种腐蚀性的环境中使用） environments connected chemical seals.)
安装方式：径向直接安装连接螺纹M20 × 1.5 Mounting: Bottom connection direct
（或其他螺纹尺寸） thread M20 × 1.5 or other
精度等级：1.5 级Accuracy: 1.5%
外径：150mm Diameter: 150mm
测量范围：正压：0.1MPa⋯⋯60MPa； Range: Positive pressure 0.1MPa⋯⋯60MPa；
　　　　　负压：-0.1～0MPa,-0.1～2.4MPa。 Negative pressure -0.1～0MPa, -0.1～2.4MPa
工作条件： Working condition:
环境温度：-40～70℃ Ambient temperature: -40～70℃
相对湿度：≤ 85% Relative humidity: ≤ 85%
工作压力：使用温度偏离20 ± 5℃时，其温Working pressure: When working temperature
度附加误差不大于0.4%/10℃ deviates from 20 ± 5℃. the
additional temperature error shall
　　　　　　　　　　　　　　　　　　　　　　　　　　　 not be more than 0.4%/10℃
滑线电阻发送器技术数据： Technical data of resistance tramsmitter
起始电阻：6～20 Ω Start resistance: 6～20 Ω
满度电阻：340～400 Ω Full scale resistance: 340～400 Ω
接线端外加电阻：≤ 6V Connection end additional resistance: ≤ 6V
外壳材质：压铸合金铝Case: Cast aluminium alloy
接头材质：铜合金Socket material: Copper alloy
波登管：铜合金Bourdon tube: copper alloy
表盘：铝，白地黑字Dial aluminum: white with black division
指针：铝，黑色Pointer: Aluminium, black
玻璃：普通玻璃Glass: Window glass
PD ·05 - 2
PD(37) 36 2008.11.6, 3:59 PM
PD
北京布莱迪仪器仪表有限公司
仪表几何尺寸 DIMENSIONS
量程范围规格代码表 TABLE OF RANGES
选型代码code 量程规格ranges 选型代码code 量程规格ranges 选型代码code 量程规格ranges
M500 -0.1 — 0MPa M030 0.1MPa M180 4MPa
M510 -0.1 — 0.06MPa M040 0.16MPa M200 6MPa
M520 -0.1 — 0.15MPa M060 0.25MPa M220 10MPa
M530 -0.1 — 0.3MPa M080 0.4MPa M230 16MPa
M540 -0.1 — 0.5MPa M100 0.6MPa M240 25MPa
M550 -0.1 — 0.9MPa M120 1MPa M270 40MPa
M560 -0.1 — 1.5MPa M140 1.6MPa M280 60MPa
M570 -0.1 — 2.4MPa M160 2.5MPa
量 程 RANGES
接线示意图 WIRING DIAGRAM
MODEL YTZ
PD ·05 - 3
Full scale
Beginning
Earth Yellow
Red
PD(37) 37 2008.11.6, 3:59 PM
BEIJING BRIGHTY INSTRUMENT CO.,LTD.
如何选型 HOW TO ORDER
MODEL YTZ
PD ·05 - 4
外 径
Diameter
量 程
Ranges
连 接 螺 纹
Connection
备 选 项
Options
安 装
方
式
Mounting
型号代码特性说明
CODE CHARACTERISTICS
YTZ 电阻远传压力表
Pressure gauge with resistance transmiting
150 Ф 150mm
1 径向直接安装Bottom mounting direct
M030 0.1MPa 请参看量程代码表See range table
M20 20 × 1.5
T00 其它特殊要求的螺纹Other special scrow threads
FWP 不锈钢位号牌 Stainless sted label
TOB 特殊标记表盘 Special mark olial
FHG 配接密封隔离体 Connected with seal insulations
基
本
型
号
Basic type
－ · · · ·
PD(37) 38 2008.11.6, 3:59 PM