美国 Babbitt LS2000 射频导纳物位开关

 

LS 2 0 0 0低成本传感器

LS2000是一个低成本的电平的开关，它可以测量几乎所有的液体，干燥物料或接口的导电或不导电的产品。 专有的射频（RF）平衡阻抗桥具有优异的温度稳定性，从而省去了重新校准单元季节。

安装探头时，它被校准在材料接触探头的情况下。 当所需物质中与探针接触，LS2000被激活，并给出了所期望的输出。

所有必要的校准指标板上，所以您需要校准LS2000是小螺丝刀。

故障安全电子提供安心。 模块化电子设备进行故障排除和修复一个单元。 备份整个单元通过我们两年保修。

固体316不锈钢棒，UHMWPE（超高分子量聚乙烯）制成的绝缘体制成的探头。 超高分子量聚乙烯具有优异的耐磨性和抗冲击性能。 密封件均采用氟橡胶“O”形圈。 所有的电子设备都装在铸铝防爆外壳。

L S 2 0 0 0   Low Cost Sensor

The LS2000 is a low-cost level switch that can measure virtually any liquid, dry material or interface of electrically conductive or non-conductive products. The proprietary radio frequency (RF) balanced impedence bridge has exceptional temperature stability, thus eliminating the need to recalibrate the unit from season to season.

When the probe is installed, it is calibrated in absence of material touching the probe. When the desired material comes in contact with the probe, the LS2000 is activated and gives the desired output.

All the necessary calibration indicators are on-board so all you need to calibrate the LS2000 is a small screwdriver.

Fail-safe electronics provide peace of mind. The modular electronics make trouble shooting and repair a snap. The entire unit is backed by our two year warranty.

The probe is made of solid 316 stainless steel rod, the insulator is made of UHMWPE (Ultra-High Molecular Weight Polyethylene). UHMWPE has excellent abrasion and impact resistance. The seals are made with Viton "O" rings. All the electronics are housed in a cast aluminum explosion-proof enclosure.