304不锈钢Y型卡套角座阀 蒸汽高温气动卫生级DN15-DN100

304不锈钢Y型卡套角座阀 蒸汽高温气动卫生级DN15-DN100

产品名称：

产品类别：    系列

介质温度：-10℃—— 200℃

阀体材质：CF8M

适用介质：蒸汽、气体、液体、粘或腐蚀性流体
product name:

Product category: series

Medium temperature: -10℃—— 200℃

Body Material: CF8M

Applicable medium: steam, gas, liquid, viscous or corrosive fluid

304不锈钢Y型卡套角座阀 蒸汽高温气动卫生级DN15-DN100

安装与维修
必须遵守适用的安全规范 　　
1． 管道必须清洁无污染。 　　
2． 根据需要安装，但zui好使执行机构朝上。注意流向。 　　
3． 连接阀门注意对准管道，只有在用户特殊要求时才取下执行机构。 　　
4． 打开或维修该角阀之前先切断流体和控制气源并降低管道系统中的压力。 　　
注意：
选择流动方向A时的特点： 　　
1． 选择该流动方向时，可提高该产品的使用寿命。 　　
2． 当工作介质为液体时，选择该流向可防水锤冲击
Installation and Repair
Applicable safety regulations must be followed
1. Pipes must be clean and free of contamination. ​​
2. Install as desired, but preferably with the actuator facing up. Pay attention to the flow direction. ​​
3. When connecting the valve, pay attention to the alignment of the pipeline, and remove the actuator only when the user has special requirements. ​​
4. Shut off the fluid and control air supply and reduce the pressure in the piping system before opening or servicing this angle valve. ​​
Notice:
Features when selecting flow direction A:
1. When this flow direction is selected, the service life of the product can be increased. ​​
2. When the working medium is liquid, choose this flow direction to prevent hammer shock