JIS Z 8901 试验粉尘灰灰尘灰尘
 

JIS Z 8901 试验粉尘列表   　　JIS粉尘是依据JIS（Japanese Industrial Standard，即日本工业标准）生产的试验粉尘，常被用于一些日系产品的检测。 　　本公司可为广大国内用户提供日本进口的下述检测杂质，包括JIS Z 8901的试验粉尘和玻璃珠产品；请在与我们联系的时候描述清楚您需要的是下面哪种产品： JIS Z 8901 *Classification     Class Material used Median * diameter ( µm ) Particle density ( g/cm3 ) Chemical composition % ( mass ) Class 1 Class 2 Class 3 Quartz sand 185 to 200 27 to 31 6.6 to 8.6 2.6 to 2.7 SiO2   95min Fe2O3, Al2O3,TiO2 MgO,Ign.loss 5max Class 4 Class 9 Talc 7.2 to 9.2 4.0 to 5.0 2.7 to 2.9 SiO2 ••• 60 to 63, Al2O3 ••• 0 to 3, MgO ••• 30 to 34 Fe2O3 ••• 0 to 3, CaO ••• 0 to 2, Ign.loss ••• 3 to 7 Class 5 Class 10 Fly ash 13 to 17 4.8 to 5.7 1.95 min SiO2Åc45min Ign.lossÅc5max Class 7 Class 8 Class 11 ** KANTO (Japanese) loam 27 to 31 6.6 to 8.6 1.6 to 2.3 2.9 to 3.1 SiO2 ••• 34 to 40, Al2O3 ••• 26 to 32, MgO ••• 0 to 7 Fe2O3 ••• 17 to 23, CaO ••• 0 to 3, Ign.loss ••• 0 to 4 Class 12 Carbon black Particle size range ••• 0.03 to 0.20 µm Absorbed amount of DBP ••• 25 to 34 ml/100g Adsorbed amount of iodine ••• 22 to 30 mg/g Class 16 Class 17 Calcium- carbonate (heavy) 3.6 to 4.6 1.9 to 2.4 2.7 to 2.8 CaO ••• 54 to 56, SiO2 ••• 0 to 3, Ign.loss ••• 42 to 45 MgO ••• 0 to 3, Fe2O3 ••• 0 to 1       * Particle size distributions are defined by JIS Z 8901. ** Sintered at 800°C, 2hours. Note :1) Class15 Mixed powder is distributed by Japan Air Cleaning Association and contains 72% of Class8, 23% of Class12 and 5% of cotton linter. 2) Class13 and Class 14 are now absent ones.     *Particle size distribution of Test Powders 1     Particle size distribution of Class 1, Class 2 and Class 3 ( Quartz sand )   Particle size µm Oversize(on mass basis)% Class 1 Class 2 Class 3 5 - 88±5 61±3 10 - 76±3 43±3 20 - 62±3 27±3 30 - 50±3 15±3 40 - 39±3 9±3 45 99 min. - - 75 90±3 20max. 3max. 106 80±3 - - 150 65±3 - - 212 45±3 - - 300 1max. - - Particle size distribution of Class 4 and Class 9 ( Talc )   Particle size µm Oversize(on mass basis)% Class 4 Class 9 2 - 79±5 4 - 55±5 5 69±5 - 8 - 23±5 10 40±5 - 16 - 6±3 20 12±5 - 30 - - 40 3±3 - 75 1max -     Particle size distribution of Class 5 and Class 10 ( Fly ash )   Particle size µm Oversize(on mass basis)% Class 5 Class 10 2 - 82±5 4 - 60±3 5 84±5 - 8 - 22±5 10 60±5 - 16 - 3±3 20 32±5 - 30 15±3 - 40 8±3 - 106 1max. - Particle size distribution of Class 7, Class 8 and Class 11 ( KNATO(Japanese) loam )   Particle size µm Oversize(on mass basis)% Class 7 Class 8 Class 11 1 - - 65±3 2 - - 50±5 4 - - 22±3 5 88±5 61±5 - 6 - - 8±3 5 - - 3±3 10 76±3 43±3 - 20 62±3 27±3 - 30 50±3 15±3 - 40 39±3 9±3 - 75 20max. 3max. -   Class 12 Particle size range ( Carbon black )   0.03~0.20µm   Particle size distribution of Class 16 and Class 17 ( Calcium carbonate( heavy ))   Particle size µm Oversize(on mass basis)% Class 16 Class 17 1 - 80±5 2 76±5 54±5 4 - 18±5 5 40±5 - 8 - 4±3 10 10±5 - 16 - 1max. 20 1max. -     -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- Glass beads GBL type Material used : Soda lime-silicate glass Particle density : 2.1 to 2.5 g/cm3 Refractive index : 1.51 to 1.53     Particle size distribution ( Unit :µm ) ( % mass basis )     Class Particle size in case of 90% oversize Particle size in case of 50% oversize Particle size in case of 10% oversize GBL-30 26 min. 30 ± 1.0 34 max. GBL-40 37 min. 40 ± 1.0 45 max. GBL-60 55 min. 59 ± 1.0 63 max. GBL-100 95 min. 100 ± 1.0 105 max.       Glass beads GBM type Material used : Barium-titanate glass Particle density : 4.0 to 4.2 g/cm3 Refractive index : 1.92 to 1.94     Particle size distribution ( Unit :µm ) ( % mass basis )     Class Particle size in case of 90% oversize Particle size in case of 50% oversize Particle size in case of 10% oversize GBM-20 18 min. 22 ± 1.0 26 max. GBM-30 26 min. 30 ± 1.0 34 max. GBM-40 37 min. 40 ± 1.0 45 max.       White fused alu mina Material used : Al2O3 99% min. Particle density : 3.9 to 4.0 g/cm3     Particle size distribution ( Unit :µm ) ( % mass basis )     Class Particle size in case of 94% oversize Particle size in case of 50% oversize Particle size in case of 3% oversize No.1 0.8 min. 2 ± 0.5 5 max. No.2 2.0 min. 4 ± 0.5 11 max. No.3 4.5 min. 8 ± 0.6 20 max. No.4 9.0 min. 14 ± 1 31 max. No.5 20 min. 30 ± 2 58 max. No.6 40 min. 57 ± 3 103 max.

   
ISO 12103-1 A2 Fine Test Dust A2粉  ISO 12103-1 A4 Coarse Test Dust A4粉  ISO 12103-1 A3 Medium Test Dust A3粉MTD粉尘  Arizona Test Dust Fractions 亚利桑那试验粉尘
MIL 810E4 Silica Sand & Dust  Iron Oxide 波特兰水泥 Type IGlass Beads 玻璃珠  PV 树脂（喷融树脂）  汽车安全带测试粉尘ECE R16, Section 7.6.3.2 (GB 14166, Section 5.6.3.2液态杂质SoftC-2A   Quartzose Mineral Dust DMT emission test dust (IEC 60312 5.1.2.5)  Test Dust Type 8® DMT test dust type 8 (IEC 60312 5.1.2.3)  Quartzose Mineral DMT carpet test dust (IEC 60312 5.1.2.2) DMT Dolomite Sand (IEC 60312 5.1.2.1)A2 ISO 细灰  A4粗灰  亚利桑那沙子亚利桑那试验粉尘  美国ISO MTD粉尘
A2测试粉A3中级试验粉尘AC DUST A2 粉尘  ISO 试验粉尘  亚力桑那A2粉尘  美国PTI碳黑粉尘  ISO 12103-2  M2铝粉  A2 ISO 细灰  ISO 12103-2  M3铝粉  ISO 12103-2  M4铝粉ISO 12103-2  M5铝粉JIS CLASS 2级粉尘  PTI 粉尘Nominal 0-5 Arizona  Test Dust  PTI 粉尘Nominal 10-20 Arizona  Test Dust  PTI 粗粉  PTI 粉尘Nominal 20-40 Arizona  Test Dust  试验用粉尘12103-1 A2类粗粉粗灰美国亚利桑那A1粉  FLY ASH 飞灰Portland Cement波特兰水泥美国亚利桑那M5粉APPIE JIS Z 8901 CLASS 1 试验粉尘APPIE JIS试验用粉体1 8种APPIE关东粉APPIE JIS test powders 1 class8 日本粉体工业技术协会APPIE  APPIE JIS Z 8901 试验用粉体1，CLASS 8  APPIE JIS Z 8901 CLASS 15粉尘COTTON LINTERS 棉花纤维铁粉（赤）氧化铁  Carbon Black炭黑Ashrae test dust with carbon black  試験用粉体１の7種, 8種, 11種JIS粉尘是依据JIS（Japanese Industrial Standard，即日本工业标准）生产的试验粉尘，常被用于一些日系产品的检测。
　　本公司可为广大国内用户提供日本进口的下述检测杂质，包括JIS Z 8901的试验粉尘和玻璃珠产品；请在与我们联系的时候描述清楚您需要的是下面哪种产品Quartz sand Talc Fly ash KANTO (Japanese) loam  Carbon black  Calcium- carbonate (heavy)  Glass beads GBL type  Glass beads GBM type White fused alu mina JIS Z8901 1 种(硅砂) JIS Z8901 3 种（硅砂）JIS Z8901 4 种（滑石粉）JIS Z8901 7 种（关东粉）JIS Z8901 8 种（关东粉）铁粉0-5微米Fe₃O₄
铁粉（赤）0-5微米Fe₂O₃  铁粉（赤）5-10微米Fe₂O₃  棉花纤维COTTON LINTERS