打开谷瀑APP浏览
推广采购上谷瀑环保
立即打开
  • 产品
  • 详情
旺铺
询价
收藏
18621801483
拨号
在线咨询
转瓶Spinner Flasks
￥1.00
上海
上海君翼仪器设备有限公司
13年 | 指数：270 | 工商已认证
店铺推荐
  • 图文详情
  • 产品参数
转瓶Spinner Flasks:

转瓶Spinner Flasks，细胞培养的一种容器。中间有一根带桨叶的轴，使用时将转瓶放置在转瓶机上。转速由转瓶机控制，带动桨叶转动，使液体混合。由于它使培养由静态变为动态，是一种简化的生物反应器，所以通常作为生物反应器放大的模拟。它适合于悬浮细胞和贴壁细胞(对微载体系统而言)培养。

CLS-1430
SPINNER FLASKS, BIOPROCESS, COMPLETE
Microcarrier spinner flasks promote optimal growth of suspension and microcarrier cultures. Indented bottoms, 100mL thru 1000mL, prevent accumulation of microcarrier beads under the impeller paddle. Please Note: The 3L, 6L & 8L Versions Do Not Have Dimpled Bottoms. The complete system includes a flask with two angled sidearms and a PTFE paddle with glass shaft that adjusts trough the compression fitting in the cap.
Replacement Components:
· The impeller assembly consists of the lower magnetic stir bar, impeller blade and blade holder
· The replacement shaft is the glass portion only
· The cap assembly consists of the corresponding screw cap, liner and compression fitting
 
Item Number Item Description PQ
CLS-1430-100 BioProcess Spinner Flask, 100mL, Dimpled Bottom, Complete EACH
CLS-1430-250 BioProcess Spinner Flask, 250mL, Dimpled Bottom, Complete EACH
CLS-1430-500 BioProcess Spinner Flask, 500mL, Dimpled Bottom, Complete EACH
CLS-1430-1L BioProcess Spinner Flask, 1,000mL, Dimpled Bottom, Complete EACH
CLS-1430-3L BioProcess Spinner Flask, 3,000mL, Plain Bottom, Complete EACH
CLS-1430-6L BioProcess Spinner Flask, 6,000mL, Plain Bottom, Complete EACH
CLS-1430-8L BioProcess Spinner Flask, 8,000mL, Plain Bottom, Complete EACH
Replacement Parts  
CLS-1705-106 #106 Orange Silicone O-Ring  
CLS-1431-03 Impeller Assembly Only, for 100mL-250mL BioProcess Spinner Flasks  
CLS-1431-05 Impeller Assembly Only, for 500mL BioProcess Spinner Flasks  
CLS-1431-06 Impeller Assembly Only, for 1L & 3L BioProcess Spinner Flasks  
CLS-1431-07 Impeller Assembly Only, for 6L & 8L BioProcess Spinner Flasks  
CLS-1425-21 Glass Shaft Only, 7mm, 100mL & 250mL Spinner Flasks  
CLS-1425-22 Glass Shaft Only, 7mm, 500mL Spinner Flasks  
CLS-1425-23 Glass Shaft Only, 7mm, 1,000mL Spinner Flasks  
CLS-1425-24 Glass Shaft Only, 7mm, 3,000mL Spinner Flasks  
CLS-1425-25 Glass Shaft Only, 9mm, 6000mL, 8000mL & 15000mL Spinner Flasks  
CLS-1432-42 Cap Assembly Only, for 100mL, 250mL & 500mL BioProcess Sinner Flasks  
CLS-1432-43 Cap Assembly Only, for 1,000mL & 3,000mL BioProcess Sinner Flasks  
CLS-1432-44 Cap Assembly for 6L, 8L, 15L & 36L BioProcess Sinner Flasks  
CLS-1705-110 Silicone O-Ring for 9mm Compression Fitting, FDA Grade  
CLS-1425-91 Stir Bar Magnet Only, 50mL-500mL Spinner Vessels  
CLS-1425-92 Stir Bar Magnet Only, 1,000mL-3,000mL Spinner Vessels  
CLS-1425-93 Stir Bar Magnet Only, 6,000mL-36,000mL Spinner Vessels  
CLS-1430-001 7mm Black Compression Fitting  
CLS-1430-003 9mm Black Compression Fitting  
CLS-1430-002 Silicone Plug Stoppers, 7mm  
CLS-1430-004 Silicone Plug Stoppers, 9mm  
CLS-1425-82 Spinner Cap Gasket, FDA Grade Silicone, 70mm Cap  
CLS-1430-83 Spinner Cap Gasket, FDA Grade Silicone, 100mm Cap (7mm)  
CLS-1425-84 Spinner Cap Gasket, FDA Grade Silicone, 100mm Cap (9mm)  


CLS-1430-F
SPINNER FLASKS, FLAT BOTTOM, BIOPROCESS, COMPLETE
Flat bottom spinner flasks promote optimal growth of suspension cultures. The complete system includes a flask with two angled sidearms and a PTFE paddle with glass shaft that adjusts through the compression fitting in the cap.
Replacement Components:
· The impeller assembly consists of the lower magnetic stir bar, impeller blade and blade holder
· The replacement shaft is the glass portion only
· The cap assembly consists of the corresponding screw cap, liner and compression fitting
 
Item Number Item Description PQ
CLS-1430-F100 BioProcess Spinner Flask, 100mL, Flat Bottom, Complete EACH
CLS-1430-F250 BioProcess Spinner Flask, 250mL, Flat Bottom, Complete EACH
CLS-1430-F500 BioProcess Spinner Flask, 500mL, Flat Bottom, Complete EACH
CLS-1430-F1L BioProcess Spinner Flask, 1,000mL, Flat Bottom, Complete EACH
CLS-1430-F3L BioProcess Spinner Flask, 3,000mL, Flat Bottom, Complete EACH
Replacement Parts  
CLS-1705-106 #106 Orange Silicone O-Ring  
CLS-1431-03 Impeller Assembly Only, for 100mL-250mL BioProcess Spinner Flasks  
CLS-1431-05 Impeller Assembly Only, for 500mL BioProcess Spinner Flasks  
CLS-1431-06 Impeller Assembly Only, for 1L & 3L BioProcess Spinner Flasks  
CLS-1425-21 Glass Shaft Only, 7mm, 100mL & 250mL Spinner Flasks  
CLS-1425-22 Glass Shaft Only, 7mm, 500mL Spinner Flasks  
CLS-1425-23 Glass Shaft Only, 7mm, 1,000mL Spinner Flasks  
CLS-1425-24 Glass Shaft Only, 7mm, 3,000mL Spinner Flasks  
CLS-1432-42 Cap Assembly Only, for 100mL, 250mL & 500mL BioProcess Spinner Flasks  
CLS-1432-43 Cap Assembly Only, for 1,000mL & 3,000mL BioProcess Spinner Flasks  
CLS-1425-91 Stir Bar Magnet Only, 50mL-500mL Spinner Vessels  
CLS-1425-92 Stir Bar Magnet Only, 1L-3L Spinner Vessels  
CLS-1430-001 7mm Compression Fitting, Black  
CLS-1430-002 7mm Silicone Plug Stoppers  
CLS-1425-82 Spinner Cap Gasket, White FDA Grade Silicone, 70mm Cap  
CLS-1425-83 Spinner Cap Gasket, 7mm, White FDA Grade Silicone, 100mm Cap  


CLS-1450
INTERNAL IMPELLER SPINNER FLASKS, BIOPROCESS, COMPLETE
MicroCarrier spinner flasks promote optimal growth of suspension and microcarrier cultures. Indented bottom (100mL thru 1000mL) prevents accumulation of microcarrier beads under the impeller paddle. The 3L version does not have a dimple. The complete system includes a flask with two angled sidearms and a PTFE paddle assembly that attaches underneath the cap decreasing the risk of contamination.
Replacement Components:
· The Complete Stirring Assembly consists of top cap, silicone gasket, glass shaft, compression fitting, magnet holder, paddle and magnetic stir bar.
· The Replacement Glass Shaft is the glass portion only.
 
Item Number Item Description PQ
CLS-1450-100 BioProcess Spinner Flask, 100mL, Dimpled Bottom, Internal Impeller, Complete EACH
CLS-1450-250 BioProcess Spinner Flask, 250mL, Dimpled Bottom, Internal Impeller, Complete EACH
CLS-1450-500 BioProcess Spinner Flask, 500mL, Dimpled Bottom, Internal Impeller, Complete EACH
CLS-1450-1L BioProcess Spinner Flask, 1,000mL, Dimpled Bottom, Internal Impeller, Complete EACH
CLS-1450-3L BioProcess Spinner Flask, 3,000mL, Internal Impeller, Complete EACH
Replacement Parts  
CLS-1705-106 #106 Orange Silicone O-Ring  
CLS-1451-01 Internal Stirring Assembly for 100mL BioProcess Spinner Flasks  
CLS-1451-03 Internal Stirring Assembly for 250mL BioProcess Spinner Flasks  
CLS-1451-05 Internal Stirring Assembly for 500mL BioProcess Spinner Flasks  
CLS-1451-06 Internal Stirring Assembly for 1,000mL BioProcess Spinner Flasks  
CLS-1451-07 Internal Stirring Assembly for 3,000mL BioProcess Spinner Flasks  
CLS-1451-40 Replacement Glass Shaft Only for 100mL Internal Impeller BioProcess Spinner Flasks  
CLS-1451-41 Replacement Glass Shaft Only for 250mL Internal Impeller BioProcess Spinner Flasks  
CLS-1451-42 Replacement Glass Shaft Only for 500mL Internal Impeller BioProcess Spinner Flasks  
CLS-1451-43 Replacement Glass Shaft Only for 1,000mL Internal Impeller BioProcess Spinner Flasks  
CLS-1451-44 Replacement Glass Shaft Only for 3,000mL Internal Impeller BioProcess Spinner Flasks  
CLS-1425-91 Replacement Stir Bar Magnet, 50-500mL Spinner Vessels  
CLS-1425-92 Replacement Stir Bar Magnet, 1L-3L Spinner Vessels  
CLS-1430-002 Silicone Plug Stopper  
CLS-1425-82 Spinner Cap Gasket Only, Silicone, 70mm  
CLS-1425-83 Spinner Cap Gasket Only, Silicone, 100mm  


CLS-1400
SPINNER FLASKS, FLAT BOTTOM, REPLACEMENT GLASS FLASK ONLY
Replacement vessel is supplied with black phenolic rubber lined caps for the 18mm side arms, polypropylene caps and pouring rings for the GL-32 and GL-45 side arms.
 
Item Number Item Description PQ
CLS-1400-25 Spinner Flask, 25mL, Flat Bottom, Replacement Glass Flask ONLY EACH
CLS-1400-50 Spinner Flask, 50mL, Flat Bottom, Replacement Glass Flask ONLY EACH
CLS-1400-100 Spinner Flask, 100mL, Flat Bottom, Replacement Glass Flask ONLY EACH
CLS-1400-250 Spinner Flask, 250mL, Flat Bottom, Replacement Glass Flask ONLY EACH
CLS-1400-500 Spinner Flask, 500mL, Flat Bottom, Replacement Glass Flask ONLY EACH
CLS-1400-1L Spinner Flask, 1000mL, Flat Bottom, Replacement Glass Flask ONLY EACH
CLS-1400-3L Spinner Flask, 3000mL, Flat Bottom, Replacement Glass Flask ONLY EACH
CLS-1400-6L Spinner Flask, 6000mL, Flat Bottom, Replacement Glass Flask ONLY EACH
CLS-1400-8L Spinner Flask, 8000mL, Flat Bottom, Replacement Glass Flask ONLY EACH
CLS-1400-15L Spinner Flask, 15000mL, Flat Bottom, Replacement Glass Flask ONLY EACH


CLS-1401
SPINNER FLASKS, DIMPLED BOTTOM, REPLACEMENT GLASS FLASK ONLY
Replacement vessel is supplied with black phenolic rubber lined caps for the 18mm side arms, polypropylene caps and pouring rings for the GL-32 and GL-45 side arms.
 
Item Number Item Description PQ
CLS-1401-100 Spinner Flask, 100mL, Dimpled Bottom, Replacement Glass Flask ONLY EACH
CLS-1401-250 Spinner Flask, 250mL, Dimpled Bottom, Replacement Glass Flask ONLY EACH
CLS-1401-500 Spinner Flask, 500mL, Dimpled Bottom, Replacement Glass Flask ONLY EACH
CLS-1401-1L Spinner Flask, 1000mL, Dimpled Bottom, Replacement Glass Flask ONLY EACH
CLS-1401-3L Spinner Flask, 3000mL, Dimpled Bottom, Replacement Glass Flask ONLY EACH
CLS-1401-6L Spinner Flask, 6000mL, Dimpled Bottom, Replacement Glass Flask ONLY EACH
CLS-1401-8L Spinner Flask, 8000mL, Dimpled Bottom, Replacement Glass Flask ONLY EACH


CLS-1402
SPINNER FLASK, DIMPLED BOTTOM WITH BAFFLES, REPLACEMENT GLASS FLASK ONLY

CLS-1410
SPINNER FLASKS, STANDARD, COMPLETE
Flask is ideal for suspension cultures. Entire unit can be autoclaved at 121°C. Made from 33 expansion glass that conforms to ASTM Type 1, Class A requirements, and also conforms to USP Type 1 requirements. Design allows for the vertical adjustment of the impeller assembly while the assembly rides on a frictionless glass to PTFE interface. Overall height is approximate, assembled complete.
Flasks are Available in Three Styles:
· Flat Bottom
· Dimpled Bottom: To improve circulation while preventing cell accumulation in the center of the flask.
· Dimpled Bottom with Baffles: To further improve overall circulation while preventing cell accumulation in the center of the flask.
 
Item Number Item Description PQ
CLS-1410-100 Spinner Flask, 100mL, Standard, Flat Bottom, Complete EACH
CLS-1410-250 Spinner Flask, 250mL, Standard, Flat Bottom, Complete EACH
CLS-1410-500 Spinner Flask, 500mL, Standard, Flat Bottom, Complete EACH
CLS-1410-1L Spinner Flask, 1000mL, Standard, Flat Bottom, Complete EACH
CLS-1410-3L Spinner Flask, 3000mL, Standard, Flat Bottom, Complete EACH
CLS-1410-6L Spinner Flask, 6000mL, Standard, Flat Bottom, Complete EACH
CLS-1410-8L Spinner Flask, 8000mL, Standard, Flat Bottom, Complete EACH
CLS-1410-15L Spinner Flask, 15000mL, Standard, Flat Bottom, Complete EACH
CLS-1411-100 Spinner Flask, 100mL, Standard, Dimpled Bottom, Complete EACH
CLS-1411-250 Spinner Flask, 250mL, Standard, Dimpled Bottom, Complete EACH
CLS-1411-500 Spinner Flask, 500mL, Standard, Dimpled Bottom, Complete EACH
CLS-1411-1L Spinner Flask, 1000mL, Standard, Dimpled Bottom, Complete EACH
CLS-1411-3L Spinner Flask, 3000mL, Standard, Dimpled Bottom, Complete EACH
CLS-1411-6L Spinner Flask, 6000mL, Standard, Dimpled Bottom, Complete EACH


CLS-1414
SPINNER FLASKS, INTERNAL STIRRING ASSEMBLY, COMPLETE
Stirring assembly in totally contained within the flask thereby decreasing the risk of contamination. Flask is ideal for suspension cultures. Entire unit can be autoclaved at 121°C. Made from 33 expansion glass that conforms to ASTM Type 1, Class A requirements. Overall height is approximate.
Flasks are Available in Three Styles:
· Flat Bottom
· Dimpled Bottom: To improve circulation while preventing cell accumulation in the center of the flask.
· Dimpled Bottom with Baffles: To further improve overall circulation while preventing cell accumulation in the center of the flask.
 
Item Number Item Description PQ
CLS-1414-100 Spinner Flask, 100mL, Internal Stirring Assembly, Flat Bottom, Complete EACH
CLS-1414-250 Spinner Flask, 250mL, Internal Stirring Assembly, Flat Bottom, Complete EACH
CLS-1414-500 Spinner Flask, 500mL, Internal Stirring Assembly, Flat Bottom, Complete EACH
CLS-1414-1L Spinner Flask, 1000mL, Internal Stirring Assembly, Flat Bottom, Complete EACH
CLS-1414-3L Spinner Flask, 3000mL, Internal Stirring Assembly, Flat Bottom, Complete EACH
CLS-1415-100 Spinner Flask, 100mL, Internal Stirring Assembly, Dimpled Bottom, Complete EACH
CLS-1415-250 Spinner Flask, 250mL, Internal Stirring Assembly, Dimpled Bottom, Complete EACH
CLS-1415-500 Spinner Flask, 500mL, Internal Stirring Assembly, Dimpled Bottom, Complete EACH
CLS-1415-1L Spinner Flask, 1000mL, Internal Stirring Assembly, Dimpled Bottom, Complete EACH
CLS-1415-3L Spinner Flask, 3000mL, Internal Stirring Assembly, Dimpled Bottom, Complete EACH


CLS-1425
REPLACEMENT COMPONENTS, STANDARD SPINNER FLASKS
Replacement Components for CLS-1410, CLS-1411 and CLS-1412 Spinner Flasks.
The Impeller Assembly consists of the lower magnetic stir bar, paddle, retaining collar and magnet holder.
The Replacement Shaft consists of the glass shaft only.
The Cap Assembly consists of the corresponding screw cap, gasket and compression fitting.
 
Item Number Item Description PQ
CLS-1425-01 Impeller Assembly, Standard Spinner Flask, 25mL EACH
CLS-1425-02 Impeller Assembly, Standard Spinner Flask, 50mL EACH
CLS-1425-03 Impeller Assembly, Standard Spinner Flask, 100mL and 250mL EACH
CLS-1425-05 Impeller Assembly, Standard Spinner Flask, 500mL EACH
CLS-1425-06 Impeller Assembly, Standard Spinner Flask, 1000mL EACH
CLS-1425-07 Impeller Assembly, Standard Spinner Flask, 3000mL EACH
CLS-1425-08 Impeller Assembly, Standard Spinner Flask, 6000mL EACH
CLS-1425-09 Impeller Assembly, Standard Spinner Flask, 8000mL EACH
CLS-1425-10 Impeller Assembly, Standard Spinner Flask, 15000mL EACH
CLS-1425-20 Replacement Glass Shaft, 7mm, 25mL and 50mL Standard Spinner Flask EACH
CLS-1425-21 Replacement Glass Shaft, 7mm, 100mL and 250mL Standard Spinner Flask EACH
CLS-1425-22 Replacement Glass Shaft, 7mm, 500mL Standard Spinner Flask EACH
CLS-1425-23 Replacement Glass Shaft, 7mm, 1000mL Standard Spinner Flask EACH
CLS-1425-24 Replacement Glass Shaft, 7mm, 3000mL Standard Spinner Flask EACH
CLS-1425-25 Replacement Glass Shaft, 9mm, 6000mL, 8000mL and 15000mL Standard Spinner Flask EACH
CLS-1425-26 Replacement Glass Shaft, 9mm, 36000mL Standard Spinner Flask EACH
CLS-1425-40 Cap Assembly, 25mL Standard Spinner Flask EACH
CLS-1432-41 Cap Assembly, 50mL Standard Spinner Flask EACH
CLS-1425-42 Cap Assembly, 100mL, 250mL and 500mL Standard Spinner Flask EACH
CLS-1425-43 Cap Assembly, 1000mL and 3000mL Standard Spinner Flask EACH
CLS-1425-44 Cap Assembly, 6000mL, 8000mL, 15000mL and 36000mL Standard Spinner Flask EACH


CLS-1425-60
REPLACEMENT COMPONENTS FOR BOTH STANDARD AND INTERNAL STYLE SPINNER FLASKS
Replacement Components for Both Standard and Internal Style Spinner Flasks
 
Item Number Item Description PQ
CLS-1425-60 Silicone O-Ring for Compression Fitting, 7mm Shaft EACH
CLS-1425-61 Compression Fitting for Glass Shaft, 7mm Shaft EACH
CLS-1425-70 Silicone O-Ring for Compression Fitting, 9mm Shaft EACH
CLS-1425-71 Compression Fitting for Glass Shaft, 9mm Shaft EACH
CLS-1425-80 Silicone Top Gasket, 38mm Cap EACH
CLS-1425-81 Silicone Top Gasket, 51mm Cap EACH
CLS-1425-82 Silicone Top Gasket, 70mm Cap EACH
CLS-1425-83 Silicone Top Gasket, 100mm Cap, 7mm Shaft EACH
CLS-1425-84 Silicone Top Gasket, 100mm Cap, 9mm Shaft EACH
CLS-1425-90 Replacement Stir Bar Magnet for 25mL Vessel EACH
CLS-1425-91 Replacement Stir Bar Magnet for 50-500mL Vessels EACH
CLS-1425-92 Replacement Stir Bar Magnet for 1-3L Vessels EACH
CLS-1425-93 Replacement Stir Bar Magnet for 6-36L Vessels EACH


CLS-1426
REPLACEMENT COMPONENTS, INTERNAL STIRRING ASSEMBLY STYLE SPINNER FLASKS
Replacement components for CLS-1414, CLS-1415 and CLS-1416 Spinner Flasks.
The Complete Impeller Assembly consists of top cap, silicone liner, glass rod, compression fitting magnet holder, paddle and magnetic stir bar.
 
Item Number Item Description PQ
CLS-1426-10 Internal Stirring Assembly, 100mL and 250mL Spinner Flask EACH
CLS-1426-11 Internal Stirring Assembly, 500mL Spinner Flask EACH
CLS-1426-12 Internal Stirring Assembly, 1000mL Spinner Flask EACH
CLS-1426-13 Internal Stirring Assembly, 3000mL Spinner Flask EACH
CLS-1426-16 Internal Stirring Assembly, 15000mL Spinner Flask EACH
CLS-1426-20 Replacement Glass Shaft, 100mL and 250mL Internal Spinner Flask EACH
CLS-1426-21 Replacement Glass Shaft, 500mL Internal Spinner Flask EACH
CLS-1426-22 Replacement Glass Shaft, 1000mL Internal Spinner Flask EACH
CLS-1426-23 Replacement Glass Shaft, 3000mL Internal Spinner Flask EACH


CLS-1427
2-PORT ASSEMBLIES, SPINNER FLASKS
Port assemblies are constructed of 316L electro-polished stainless steel. These port assemblies fit all types of spinner flasks. The assemblies consist of a siphon and vent tube. Supplied complete with a GL-45 open top cap and silicone gasket.
 
Item Number Item Description PQ
CLS-1427-01 2-Port Assembly, 500mL Spinner Flask EACH
CLS-1427-02 2-Port Assembly, 1000mL Spinner Flask EACH
CLS-1427-03 2-Port Assembly, 3000mL Spinner Flask EACH
CLS-1427-04 2-Port Assembly, 6000mL Spinner Flask EACH
CLS-1427-05 2-Port Assembly, 8000mL Spinner Flask EACH
CLS-1427-06 2-Port Assembly, 15000mL Spinner Flask EACH
CLS-1481-21 Replacement Open GL-45 Cap Only for Port Assembly P6
CLS-1428-11 Replacement Open GL-45 White FDA Silicone Gasket Only for Port Assembly EACH
CLS-1481-20 Replacement Open GL-32 Cap Only for Port Assembly P6
CLS-1428-13 Replacement Open GL-32 Gasket Only for Port Assembly EACH


CLS-1429
VENT PORT ASSEMBLY, SPINNER FLASKS
Vent port assembly is constructed of 316L electro polished stainless steel. These port assemblies fit all types of spinner flasks. Configurations consist of a single vent tube, vent and short fill tubes, or angled vent and fill tubes. Supplied complete with a GL-32 or 45 open top cap and silicone gasket.
 
Item Number Item Description PQ
CLS-1429-01 2-Port Vent Assembly, 100-250mL Spinner Flask EACH
CLS-1429-10 Single Port Vent Assembly, 500-36000mL Spinner Flask EACH
CLS-1429-20 2-Port Vent Assembly, 500-36000mL Spinner Flask EACH
 
材质：玻璃
成分：见具体描述
规格型号：见具体描述
允许误差：见具体描述 ml
品牌：美国Chemglass
型号：转瓶Spinner Flasks
内容声明：谷瀑环保为第三方平台及互联网信息服务提供者，谷瀑环保（含网站、客户端等）所展示的商品/服务的标题、价格、详情等信息内容系由店铺经营者发布，其真实性、准确性和合法性均由店铺经营者负责。谷瀑环保提醒您购买商品/服务前注意谨慎核实，如您对商品/服务的标题、价格、详情等任何信息有任何疑问的，请在购买前通过谷瀑环保与店铺经营者沟通确认；谷瀑环保设备网上存在海量店铺，如您发现店铺内有任何违法/侵权信息，请在谷瀑环保PC版首页底栏投诉通道进行投诉。