1、电阻测量范围/ Resistance measuring range: 104Ω~1×1016Ω 电阻率/ Resistivity: 104 ~ 2.0×1016 Ω-m; 2、液晶显示: 电阻率、压强、温度、电导率、电流电压、可输入测试样品数据(圆柱:直径,高度;方体:长*宽*高)单位可以切换(mm、cm、m) LCD:resistivity. pressure. temperature. conductivity. current voltage. input test sample data(cylinder: diameter. height.cube: L * W * H)unit can be switched(mm、cm、m) 3、内置测试电压:0-1000V Built in test voltage: 0-1000V can be set freely. 4、基本准确度accuracy:5% 5、使用环境:温度:0℃~40℃,相对湿度<80% environment:temperature:0℃~40℃,relative humidity <80% 6、测试电压: 10/50/100/250/500/1000V 7、供电形式Power supply: AC 220V,50HZ,功耗约5W 8、测量模式:手动/自动量程。带PC测试软件(选购),USB通讯接口,软件界面同步显示、分析、保存和打印数据! Measuring mode:manual / automatic range. With PC test software (optional). USB communication interface. synchronous display of software interface.analyze. save and print data. 9、常用电极(夹具)装置有(选购): A型:固体状三环电极装置;B型:粉末状加压装置 C型:棒状测量电极装置 Commonly used electrode (fixture) device (optional): Type A: solid three-ring electrode device. Type B: powder pressurized device. Type C: rod-shaped measuring electrode device. 表面体积电阻测试仪 操作流程 1.开机预热15分钟,测试数据稳定. 2.设定测试样品参数. 3.显示测试数据. 4.PC软件处理数据及报表.