树脂增硬透明陶瓷粉助剂 XZ-TC56

产品型号：XZ-TC56,全部采用纳米陶瓷粉体材料精心配制而成，添加油性丙酸树脂，环氧树脂，硅树脂，聚氨酯树脂，三聚氰胺树脂等各种树脂中，搅拌均匀，添加量为5%-10%，固化后透明度良好，既能增加硬度，又不影响透明度，用再树脂塑料等可燃的橡胶塑料制品中，还有阻燃性能。合肥翔正化学，产品介绍：该树脂增硬透明陶瓷粉添加助剂 XZ-TC56显白色蓬松粉末状态，粒径小；比表面积≥80m2/g。粒度分布均匀、纯度高、极好分散，其比表面高，具有耐高温的惰性，高活性；多孔性；硬度高、尺寸稳定性好，具有较强的表面酸性和一定的表面碱性，耐酸碱，对环氧树脂的增加硬度，耐磨性增加尤其明显，同时可广泛应用于各种塑料、橡胶、陶瓷、耐火材料等产品的补强增韧，对提高产品的致密性、光洁度、冷热疲劳性、断裂韧性、抗蠕变性能和高分子材料产品的耐磨性能尤为显著。极好分散，在水中，溶剂无水酒精、丙醇、丙二醇、异丙醇、乙二醇单丁醚、丙酮、丁酮、苯、二甲苯内，不需加分散剂，搅拌搅拌即可以充分的悬浮分散均匀。长期不沉降。经过长期实践验证，普通的在环氧树脂，硬化后硬度约为2H，添加3%的含量的环氧树脂增硬陶瓷粉添加剂XZ-TC56后，硬度可达到4H。技术指标：超细蓬松白色粉末。纳米陶瓷粉平均粒度(nm) 20±5。熔点：2000℃左右，相对密度（水=1）：3.97-4.0 应用范围：

厂商：翔正。

产品级别：工业级。

联系方式： 舒先生（0） ；0551-65358063；（0）15256535805 网址：www.xz988.com.cn   邮箱：    合肥翔正化学科技有限公司

Resin hardening transparent ceramic powder additive XZ-TC56

Product type: XZ-TC56, all of the use of nano ceramic powder material carefully prepared, adding oily propionic acid resin, epoxy resin, silicone resin, polyurethane resin, melamine resin and other resin, mixing evenly, adding amount of 5%-10%, after curing, good transparency, can increase the hardness, and does not affect the transparency, with resin plastics and other flammable rubber and plastics, and the flame retardant properties. Hefei Xiangzheng chemistry, the resin hardening transparent ceramic powder additives XZ-TC56 significant white fluffy powder, small particle size; specific surface area is larger than 80m2/g. Uniform particle size distribution, high purity, good dispersion, the high specific surface, good resistance to high temperature and inert, high activity; porous; high hardness, good dimensional stability, strong surface acidity and surface alkaline, acid and alkali resistance, the hardness increased with epoxy resin, the wear resistance increases were particularly noticeable, also can be widely applied to all kinds of plastic, rubber, ceramics, refractories and other products of the strengthening and toughening, especially to improve the wear resistance products compactness, smoothness, thermal fatigue, fracture toughness, creep resistance and high polymer material product. Excellent dispersion in water, solvent ethanol, propanol, propylene glycol, isopropyl alcohol, ethylene glycol monobutyl ether, acetone, butanone, benzene, xylene, without dispersing agent, suspension mixing that can be fully dispersed evenly. Long-term settlement. Through long-term practice verification, common in epoxy resin, hardening hardness of about 2H, epoxy resin by adding 3% content increasing hard ceramic powder additive XZ-TC56, hardness can reach 4H. The technical indexes: the superfine fluffy white powder. Nano ceramic powder average particle size (nm) 20 + 5. Melting point: 2000 DEG C, relative density (water =1): the application of 3.97-4.0:

Manufacturer: Cheung is.

Products: industrial grade level.