UV Dicing Tape:No.6360-00
standard
Feature:
• Non-PVC backing is used
• High-Pressure mercury lamp or blacklight canbe used as light source
• Isotropic performance at expanding process
Application:
• Dicing of wafer (substrate)
Property:
ItemNo. | No.6360-00 | ||||||||||||||
Color | Tape(PO) | Translucent | |||||||||||||
Liner | Transparent | ||||||||||||||
Thickness(um) Liner:38um | Backing | 90 | |||||||||||||
Adhesive | 10 | ||||||||||||||
Peel strength [N/10mm] ():After UV |
SUS | 2.5(0.16) | |||||||||||||
Glass | 2.3(0.15) | ||||||||||||||
SI wafer | 2.5(0.15) | ||||||||||||||
Holding Power | 40℃/24hour | < 0.1mm | |||||||||||||
Tensile Strength (Before UV) (TD/MD)(N/10㎜) |
17/20 (15/18) | ||||||||||||||
Elongation (Before UV) (TD/MD)(%/10㎜) |
760/770 (700/730) |
・UV irradiation condition : High-pressure mercury lamp, 75mW/cm2 at365nm, for 4 sec(300mJ/cm2).
・Peel Strength (90º Peel): Pass the 2kg roller in each direction ata rate of 300mm/min. Aging time ; 20min. Rate of peel ;300mm/min.
・Holding power : Pass the 2kg roller in each direction at a rate of300mm/min. Load ; 1kg/25㎜×25㎜.
・TD:Transverse Direction, MD:Machine Direction.
型号: | .6360-00 |
加工定制: | 否 |